93600451 - 

The 9360 Series offers the latest in rugged, non-contacting Hall Effect sensing. The design offers the benefits of potentiometers while providing the superior reliability and durability of non-contacting technology. Using a dual redundant design the 9360 Series provides highly accurate output for up to 360° of electrical travel. The sensors are programmed at the factory and can be configured to a wide variety of application requirements. The 9360 Series is housed in a compact, lightweight package that includes an integral connector and rotor sealed against water and dust.

Features:

Rotating Magnet/Fixed Sensor Configuration Provides Improved Accuracy and Reliability

Two Independent Outputs for Redundancy

Factory Programmable Outputs; Programmable Offset, Gain, Slope and Temperature Compensation

Ratiometric Output

Fully Sealed Construction


Specifications:

Mechanical Travel:

Continuous Rotation for Electrical Angles Greater Than 165°

180° Mechanical Stops for Electrical Angles of 180° or Less

Frequency Response: 1 kHz Min.

Weight: 35 Grams Max.

Input Voltage: 5.0 VDC ±0.25 VDC

Input Current: 10 mA Maximum Per Output; 20 mA Max. Total

Sensor 1 Output: 0.50 V to 4.50 V

Sensor 2 Output: 45 V to 0.5 V

Accuracy: ±0.6% of Full Scale at 25°C; ±0.9% of Full Scale Over Operating Temperature Range

Electromagnetic Compatibility: 100 V/Meter, 14 kHz to 1 GHz

Vibration: 10 GHz Peak 20-2,000 Hz

Shock: 50 GHz, Half-Sine Pulse 5 ms Duration

Sealing: IP66/67

Operation Temperature: –40°C to +85°C