SR10-0.033-1%產(chǎn)品概述
Type SR Precision Current Sense Resistors, ± 1.0% Tolerance
Standard Tolerance: 1%
Temperature Coefficient:
TC ref. to +25°C, ΔR taken at –15°C and +105°C
0.081 Ohm to 1.00 Ohm: –50 to +100 ppm/°C
0.025 Ohm to 0.080 Ohm: 0 to +150 ppm/°C
0.008 Ohm to 0.024 Ohm: 0 to +200 ppm/°C
Power Rating: The power rating should be limited as shown in the Derating Curve based on the maximum ambient temperature. The Derating Curve is based on still air with natural convection around the resistor.
Measurement Note: For these specifications, resistance measurement shall be made using Kelvin (4-wire) connections with appropriate current and sense connections to the resistor terminals.
Circuit Board Layout: The circuit board traces connecting to the current terminals must be sized appropriately for the current flowing through the trace to avoid excessive heating of the trace. For example, an 0.008 ohm resistor operated at 2.0 watts would have 15.8 amps flowing through the circuit board traces into the current terminals.
Features
Kelvin Terminals
Available in 1 Watt and 2 Watt Versions
Non-Inductive Design
Compact Footprint
Specifications
Low Temperature Coefficient — See Table
Full Power Rating Up to 70°C — See Derating Curve
Stability: 1000 Hours at Full Rated Power at 70°C ΔR 0.2% Max.
Datasheet
