8414N/2HP -

Fan; DC; 24V; 80x80x25mm; Sq; 46.5CFM; 37dBA; 2.8W; 3600RPM; Leadwires

聲明：圖片僅供參考，請以實物為準！

訂購熱線： 400-900-3095 0755-21000796, QQ:800152669, Email:sales@szcwdz.com

由于產品數據庫龐大，部分產品信息可能未能及時更新，下單前請與銷售人員確認好實時在庫數量，謝謝合作！

Highlights:

Ball bearings and sleeve bearings available.

Some models suitable for use at high ambient temperatures up to 85°C.

General characteristics:

Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.

Fully integrated electronic commutation.

Protected against reverse polarity and locking.

Connection via single strands AWG 24, TR 64. Bared and tin-plated.

Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor.

Mass: 95 g.

Air Flow	46.5 CFM (1317 L/Min.)
Bearing Type	Ball
Brand/Series	8400N Series
Configuration	Square
Dimensions	3.2 x 3.2 x 1 In. (80 x 80 x 25 mm)
Direction	Exhaust over Struts
Fan Type	DC
Material	Plastic
Noise Level	37 dBA
Power Rating	2.8
Primary Type	Fans
Rotation	CCW
Size	3.2 x 1 (80 x 25) In. (mm)
Size, Approximate	3.2 x 3.2 In. (80 x 80 mm)
Speed	3600 RPM
Temperature, Operating, Maximum	70 °C
Temperature, Operating, Minimum	-20 °C
Termination	Wire Leads
Thickness, Approximate	1 In. (25 mm)
Type	Square
Voltage Rating	24 VDC
Weight	95 g
關鍵詞