HSCMRNN001BGAA5 -
Sensor, Pressure, Low, Surface Mount, 0Bar to 1 Bar Pressure Range, Gage
聲明：圖片僅供參考，請以實物為準！
- 制造商產品編號：
- HSCMRNN001BGAA5
- 倉庫庫存編號：
- 70120301
由于產品數據庫龐大，部分產品信息可能未能及時更新，下單前請與銷售人員確認好實時在庫數量，謝謝合作！
HSCMRNN001BGAA5產品概述
The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 2 kHz.
The HSC Series is calibrated over the temperature range of 0° C to 50° C [32° F to 122° F]. The sensor is characterized for operation from a single power supply of either 3.3 VDC or 5.0 VDC.
These sensors measure absolute, differential, and gage pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Differential versions allow application of pressure to either side of the sensing diaphragm. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere.
The HSC Series sensors are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. They are designed and manufactured according to standards in ISO 9001.
Datasheet
