FN2410H-80-34 - 

FN2410 and FN2412 filters provide exceptional conducted attenuation performance. Using chokes with high saturation resistance and excellent thermal behavior allows filters to retain their performance even in very noisy applications and under full load conditions. FN2410 filters are designed for traditional chassis-mounting, FN2412 filters snap-in mount quickly and easily on TS 35 DIN rails, common in most electrical cabinets. Touch-safe industrial grade terminal blocks provide maximum electrical safety and protect personnel from accidental contact with life conductors for the most demanding installation standards.

1× 250 VAC Maximum Continuous Operating Voltage

DC to 400 Hz Operating Frequency

4× Rated Current Overload Capability at Switch-on and 1.5× Rated Current for 1 Minute, Once Per Hour

–25° to +100°C Temperature Range

IP20 Protection

UL94V-2 or Better Flammability Rating

Design Corresponding to: UL1283, CSA22.2 No. 8 1986, EN 133'200

High Potential Test Voltage: P → E 2000VAC for 2 Seconds

P → N 1100 VDC for 2 Sec.

1,200,000 Hours MTBF @ 50°C/250 V (Mil-HB-217F)